Getting Started with ODYSSEY – STM32MP135D | Seeed Studio Wiki

[giscus[bot]]

Getting Started with ODYSSEY – STM32MP135D | Seeed Studio Wiki

ODYSSEY, STM32MP135D

https://wiki.seeedstudio.com/ODYSSEY-STM32MP135D/

[kiranr193]

I am not able to build the image with buildroot procedure, Errors for bmi08x package download. Can you please show me to build image I can use?

[jathishjk]

How can I power the board using an External 5V power supply?

[nfs0619]

Hello! To ensure a more stable power supply, we recommend powering the board through the USB-C port. Supplying power through the pins may expose you to voltage fluctuations, which could affect normal operation. If you have any other questions or need further assistance, please feel free to contact our technical support at techsupport@seeed.io. We’ll be happy to assist you!

[jathishjk]

Thank you for you reply

[jeswanthng]

Could you please guide me on how to connect the ST-Link debugger to the board? I haven't been able to find any documentation on this and would appreciate your help.

[nfs0619]

Hello, I have attached the schematic and connection diagram for the ODYSSEY – STM32MP135D, which you can use as a reference. However, you will need to confirm whether the ST-Link pins correspond correctly. Hope this helps!

Schematics_and_Connection_Diagrams.zip

[jdgfirst]

I try to build the image. but can't . There is a lot of errors when building.
I am using ubuntu 24.04.2 LTS and buildroot 2023.02.5, but can't build image. Also buildroot 2025.02.5 is not built.
What is problem?. Plese answer to me. I have a ODYSSEY-STM32MP135D board.

[nfs0619]

Hello,

Based on the information provided, we are unable to accurately identify the issue. I recommend that you send the relevant error logs to our technical support email at techsupport@seeed.io. Our support team will analyze the logs and provide you with an appropriate solution. Thank you for your understanding and cooperation!

[jdgfirst]

Dear When I try to build , there is some errors as follows.

--- error buildroot 2025.02 ------ Successfully built cffi-1.17.1-cp312-cp312-linux_x86_64.whl

>> host-python-cffi 1.17.1 Installing to host directory

(cd /home/dgjeong/mp1_t2/buildroot/output/build/host-python-cffi-1.17.1//; PATH="/home/dgjeong/mp1_t2/buildroot/output/host/bin:/home/dgjeong/mp1_t2/buildroot/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin" PYTHONNOUSERSITE=1 GIT_DIR=. PATH="/home/dgjeong/mp1_t2/buildroot/output/host/bin:/home/dgjeong/mp1_t2/buildroot/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin" PKG_CONFIG="/home/dgjeong/mp1_t2/buildroot/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/dgjeong/mp1_t2/buildroot/output/host/lib/pkgconfig:/home/dgjeong/mp1_t2/buildroot/output/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/dgjeong/mp1_t2/buildroot/output/host/include" CFLAGS="-O2 -I/home/dgjeong/mp1_t2/buildroot/output/host/include" CXXFLAGS="-O2 -I/home/dgjeong/mp1_t2/buildroot/output/host/include" LDFLAGS="-L/home/dgjeong/mp1_t2/buildroot/output/host/lib -Wl,-rpath,/home/dgjeong/mp1_t2/buildroot/output/host/lib" INTLTOOL_PERL=/usr/bin/perl PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG="/home/dgjeong/mp1_t2/buildroot/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_LIBDIR="/home/dgjeong/mp1_t2/buildroot/output/host/lib/pkgconfig:/home/dgjeong/mp1_t2/buildroot/output/host/share/pkgconfig" /home/dgjeong/mp1_t2/buildroot/output/host/bin/python3 /home/dgjeong/mp1_t2/buildroot/support/scripts/pyinstaller.py dist/* --interpreter=/home/dgjeong/mp1_t2/buildroot/output/host/bin/python --script-kind=posix --purelib=/home/dgjeong/mp1_t2/buildroot/output/host/lib/python3.12/site-packages --headers=/home/dgjeong/mp1_t2/buildroot/output/host/include/python3.12 --scripts=/home/dgjeong/mp1_t2/buildroot/output/host/bin --data=/home/dgjeong/mp1_t2/buildroot/output/host )

>> host-python-semantic-version 2.10.0 Downloading

wget -nd -t 3 --connect-timeout=10 -O '/home/dgjeong/mp1_t2/buildroot/output/build/.semantic_version-2.10.0.tar.gz.GpdL8r/output' 'https://files.pythonhosted.org/packages/7d/31/f2289ce78b9b473d582568c234e104d2a342fd658cc288a7553d83bb8595/semantic_version-2.10.0.tar.gz'

…

--2025-03-25 11:30:55-- https://files.pythonhosted.org/packages/7d/31/f2289ce78b9b473d582568c234e104d2a342fd658cc288a7553d83bb8595/semantic_version-2.10.0.tar.gz Resolving files.pythonhosted.org (files.pythonhosted.org)... failed: Temporary failure in name resolution. wget: unable to resolve host address ‘files.pythonhosted.org’ wget -nd -t 3 --connect-timeout=10 -O '/home/dgjeong/mp1_t2/buildroot/output/build/.semantic_version-2.10.0.tar.gz.uNZ00Z/output' 'https://sources.buildroot.net/python-semantic-version/semantic_version-2.10.0.tar.gz'

--2025-03-25 11:30:55-- https://sources.buildroot.net/python-semantic-version/semantic_version-2.10.0.tar.gz Resolving sources.buildroot.net (sources.buildroot.net)... failed: Temporary failure in name resolution. wget: unable to resolve host address ‘sources.buildroot.net’ wget -nd -t 3 --connect-timeout=10 -O '/home/dgjeong/mp1_t2/buildroot/output/build/.semantic_version-2.10.0.tar.gz.gY8bpB/output' 'https://sources.buildroot.net/semantic_version-2.10.0.tar.gz'

--2025-03-25 11:30:55-- https://sources.buildroot.net/semantic_version-2.10.0.tar.gz Resolving sources.buildroot.net (sources.buildroot.net)... failed: Temporary failure in name resolution. wget: unable to resolve host address ‘sources.buildroot.net’ make[1]: *** [package/pkg-generic.mk:179: /home/dgjeong/mp1_t2/buildroot/output/build/host-python-semantic-version-2.10.0/.stamp_downloaded] Error 1 make: *** [Makefile:83: _all] Error 2 Please answer to me. Thanks you From: Frank Nie ***@***.***> Sent: Monday, March 24, 2025 6:56 PM To: Seeed-Studio/wiki-documents ***@***.***> Cc: jdgfirst ***@***.***>; Comment ***@***.***> Subject: Re: [Seeed-Studio/wiki-documents] Getting Started with ODYSSEY – STM32MP135D | Seeed Studio Wiki (Discussion #1330) Hello, Based on the information provided, we are unable to accurately identify the issue. I recommend that you send the relevant error logs to our technical support email at ***@***.*** ***@***.***> . Our support team will analyze the logs and provide you with an appropriate solution. Thank you for your understanding and cooperation! — Reply to this email directly, view it on GitHub <#1330 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFJID624DJEYTK6JGE6F2WT2V7JERAVCNFSM6AAAAABXVCDM2SVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENRQGAYDQOA> . You are receiving this because you commented. <https://github.com/notifications/beacon/BFJID63MF64LRCPT7CWMGET2V7JERA5CNFSM6AAAAABXVCDM2SWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAYBBRQ.gif> Message ID: ***@***.*** ***@***.***> >

[nfs0619]

Hello,

Thank you for sharing the error logs. To better assist you, we kindly ask that you send the complete error logs and relevant details to our technical support team at techsupport@seeed.io. This will allow our engineers to analyze the issue thoroughly and provide you with a more accurate solution.

We appreciate your cooperation and look forward to helping you resolve this issue. Thank you!

[LakshayNegi108]

I got new board and after powering it up I get not data on the debug serial terminal. I have tried all the combinations of boot pins. I even tried buildroot image on SD card but board is just not doing anything. Am I missing something here?

[ReKST-117]

May I kindly confirm what debugger you used? Can you first take a photo of your hardware configuration?

Anyway, this problem might be complex so we recommend you send the complete error logs, photos and relevant details to our technical support team at techsupport@seeed.io This will allow our engineers to analyze the issue thoroughly and provide you with a more accurate solution.

[LakshayNegi108]

Issue with SD Card image, working after flashing using Balena Etcher. Now I am getting this error. I build this image with same steps as above.
Starting kernel ...

[ 0.007657] /cpus/cpu@0 missing clock-frequency property
[ 1.167256] Driver 'scmi-optee' was unable to register with bus_type 'tee' because the bus was not initialized.
[ 1.461420] stm32-cpufreq stm32-cpufreq: OPP-v2 not supported

[LakshayNegi108]

Also red LED is blinking

[ReKST-117]

Hi LakshayNegi108, can you send a photo of device and other debug details to techsupport@seeed.io? Thanks!

[sajidaap]

How can I run the Yocto build image on this board?

[nfs0619]

Thanks for reaching out.

You might find it helpful to start a discussion on our forum, where the community and our engineers can share their experience:
https://forum.seeedstudio.com/

If you prefer, you can also reach our technical support team directly at techsupport@seeed.io.

[Aryan-Sewa]

hello, I'm using a USB to TTL/UART for debugging. my STM32MP135D is completely new and i have not flashed any OS or performed any eMMC booting or NFS yet and im just trying to check whether if the debugging port of the board works or not, so i tried to use the debugging hardware as mentioned above, gave the connections as required and tried to debug via picocom as well as via putty but im getting junk values in the terminal. So is this expected/normal or is there any issue in the board or is it mandatory to use ST-LINKv3 debugging module for this board rather than using USB to TTL/UART ?? please let me know about the actual issue.