你的demo不完整。我这里补充下：

[JobsKits]

示例代码：【一般的网络请求，只带body参数，最多也就是自定义header】
-(void)networking_messageSecondClassListGET{
NSLog(@"当前是否有网：%d 状态：%ld",[ZBRequestManager isNetworkReachable],(long)[ZBRequestManager networkReachability]);
[DataManager sharedInstance].tag = [ReuseIdentifier stringByAppendingString:NSStringFromSelector(_cmd)];
[RequestTool initConfig];//公共配置、插件机制、证书设置
@weakify(self)
NSDictionary *parameters = @{};
[DDNetworkingAPI requestApi:NSObject.messageSecondClassListGET.funcName
parameters:parameters
successBlock:^(id data) {
@strongify(self)
}failureBlock:^(id data) {
@strongify(self)
}];
}

/// 邀请好友
+(void)userInfoInviteFriendPOST:(id)parameters
successBlock:(MKDataBlock)successBlock{
// NSDictionary *parameterss = @{};
// NSDictionary *headers = @{};

 [ZBRequestManager requestWithConfig:^(ZBURLRequest * _Nullable request) {

     request.server = NSObject.BaseUrl;
     request.url = [request.server stringByAppendingString:NSObject.userInfoInviteFriendPOST.url];
     
     NSLog(@"request.URLString = %@",request.url);
     
     request.methodType = ZBMethodTypePOST;//默认为GET
     request.apiType = ZBRequestTypeRefresh;//（默认为ZBRequestTypeRefresh 不读取缓存，不存储缓存）
     request.parameters = parameters;//与公共配置 Parameters 兼容

// request.headers = headers;//与公共配置 Headers 兼容
request.retryCount = 1;//请求失败 单次请求 重新连接次数 优先级大于 全局设置，不影响其他请求设置
request.timeoutInterval = 10;//默认30 //优先级 高于 公共配置,不影响其他请求设置
if (![NSString isNullString:[DataManager sharedInstance].tag]) {
request.userInfo = @{@"info":[DataManager sharedInstance].tag};//与公共配置 UserInfo 不兼容 优先级大于 公共配置
};//与公共配置 UserInfo 不兼容 优先级大于 公共配置

     {

// request.filtrationCacheKey = @[@""];//与公共配置 filtrationCacheKey 兼容
// request.requestSerializer = ZBJSONRequestSerializer; //单次请求设置 请求格式 默认JSON，优先级大于 公共配置，不影响其他请求设置
// request.responseSerializer = ZBJSONResponseSerializer; //单次请求设置 响应格式 默认JSON，优先级大于 公共配置,不影响其他请求设置

/// 多次请求同一个接口 保留第一次或最后一次请求结果 只在请求时有用 读取缓存无效果。默认ZBResponseKeepNone 什么都不做。使用场景是在 重复点击造成的 多次请求，如发帖，评论，搜索等业务
// request.keepType=ZBResponseKeepNone;
}//一些临时的其他的配置

 }progress:^(NSProgress * _Nullable progress){
     NSLog(@"进度 = %f",progress.fractionCompleted * 100);
 }success:^(id  _Nullable responseObject,
            ZBURLRequest * _Nullable request){
     if (successBlock) {
         successBlock(responseObject);
     }
 }failure:^(NSError * _Nullable error){
     NSLog(@"error = %@",error);
 }finished:^(id  _Nullable responseObject,
             NSError * _Nullable error,
             ZBURLRequest * _Nullable request){
     NSLog(@"请求完成 userInfo:%@",request.userInfo);
 }];

}

[JobsKits]

示例代码：【特殊的网络请求：可以body里面携带参数，也可以自定义header，并且表单模式post传输data数据】
/// 帖子图片上传 POST
-(void)networking_postUploadImagePOST{
NSLog(@"当前是否有网：%d 状态：%ld",[ZBRequestManager isNetworkReachable],(long)[ZBRequestManager networkReachability]);
[DataManager sharedInstance].tag = [ReuseIdentifier stringByAppendingString:NSStringFromSelector(_cmd)];

[RequestTool initConfig];//公共配置、插件机制、证书设置
@weakify(self)
NSDictionary *parameters = @{};
[DDNetworkingAPI requestApi:NSObject.postUploadImagePOST.funcName
uploadImagesParamArr:@[parameters,
self.photosImageMutArr]
successBlock:^(id data) {
@strongify(self)
NSLog(@"data = %@",data);
}
failureBlock:^(id data) {
@strongify(self)
NSLog(@"data = %@",data);
}];
}

+(void)postUploadImagePOST:(id)parameters
uploadImageDatas:(NSMutableArray<UIImage *> *)uploadImageDatas
successBlock:(MKDataBlock)successBlock
failureBlock:(MKDataBlock)failureBlock{

NSMutableArray *uploadDatas = NSMutableArray.array;
for (int i = 0; i < uploadImageDatas.count; i++) {
UIImage *image = uploadImageDatas[i];
NSData *imageData = UIImageJPEGRepresentation(image, 1.0);
NSInteger time = NSDate.date.timeIntervalSince1970 * 1000;
NSString *fileName = [NSString stringWithFormat:@"%ld_%u.jpeg",time,arc4random() / 1000];
ZBUploadData *zbdata = [ZBUploadData formDataWithName:@"file"
fileName:fileName
mimeType:@"image/jpeg"
fileData:imageData];
[uploadDatas addObject:zbdata];
}
[ZBRequestManager requestWithConfig:^(ZBURLRequest * request) {
request.server = NSObject.BaseUrl;
request.url = [request.server stringByAppendingString:NSObject.postUploadImagePOST.url];
NSLog(@"request.URLString = %@",request.url);
request.methodType = ZBMethodTypeUpload;
request.apiType = ZBRequestTypeRefresh;//（默认为ZBRequestTypeRefresh 不读取缓存，不存储缓存）
// request.parameters = parameters;//与公共配置 Parameters 兼容
// request.headers = headers;//与公共配置Headers 兼容
request.retryCount = 1;//请求失败 单次请求 重新连接次数 优先级大于 全局设置，不影响其他请求设置
request.timeoutInterval = 120;//默认30 //优先级 高于 公共配置,不影响其他请求设置
request.requestSerializer = ZBHTTPRequestSerializer;
request.uploadDatas = uploadDatas;
if (![NSString isNullString:[DataManager sharedInstance].tag]) {
request.userInfo = @{@"info":[DataManager sharedInstance].tag};//与公共配置 UserInfo 不兼容 优先级大于 公共配置
};//与公共配置 UserInfo 不兼容 优先级大于 公共配置
} progress:^(NSProgress * _Nullable progress) {
NSLog(@"onProgress: %.2f", 100.f * progress.completedUnitCount/progress.totalUnitCount);
} success:^(id responseObject,ZBURLRequest * request) {
NSLog(@"responseObject: %@", responseObject);
if (successBlock) {
successBlock(responseObject);
}
} failure:^(NSError * _Nullable error) {
NSLog(@"error: %@", error);
if (failureBlock) {
failureBlock(error);
}
}];
}

[JobsKits]

示例代码：【特殊的网络请求：可以body里面携带参数，也可以自定义header，并且表单模式post传输data数据】
/// 帖子视频上传 POST
-(void)networking_postuploadVideoPOST{
NSLog(@"当前是否有网：%d 状态：%ld",[ZBRequestManager isNetworkReachable],(long)[ZBRequestManager networkReachability]);
[DataManager sharedInstance].tag = [ReuseIdentifier stringByAppendingString:NSStringFromSelector(_cmd)];

[RequestTool initConfig];//公共配置、插件机制、证书设置
@weakify(self)
NSDictionary *parameters = @{};
[DDNetworkingAPI requestApi:NSObject.postuploadVideoPOST.funcName
uploadVideosParamArr:@[parameters,
self.videosData]
successBlock:^(id data) {
@strongify(self)
NSLog(@"data = %@",data);
}
failureBlock:^(id data) {
@strongify(self)
NSLog(@"data = %@",data);
}];
}

+(void)postuploadVideoPOST:(id)parameters
uploadVideo:(NSData *)videoData
successBlock:(MKDataBlock)successBlock
failureBlock:(MKDataBlock)failureBlock{

NSInteger time = NSDate.date.timeIntervalSince1970 * 1000;
NSString *fileName = [NSString stringWithFormat:@"%ld_%u.mp4", time, arc4random() / 1000];

ZBUploadData *zbdata = [ZBUploadData formDataWithName:@"file"
fileName:fileName
mimeType:@"video/mp4"
fileData:videoData];

// ZBUploadData *zbdata = [ZBUploadData formDataWithName:@"file"
// fileName:fileName
// mimeType:@"video/mp4"
// fileURL:videoURL];

NSMutableArray *uploadDatas = [NSMutableArray arrayWithObject:zbdata];

[ZBRequestManager requestWithConfig:^(ZBURLRequest * request) {
request.server = NSObject.BaseUrl;
request.url = [request.server stringByAppendingString:NSObject.postuploadVideoPOST.url];
NSLog(@"request.URLString = %@",request.url);
request.methodType = ZBMethodTypeUpload;
request.apiType = ZBRequestTypeRefresh;//（默认为ZBRequestTypeRefresh 不读取缓存，不存储缓存）
// request.parameters = parameters;//与公共配置 Parameters 兼容
// request.headers = headers;//与公共配置Headers 兼容
request.retryCount = 1;//请求失败 单次请求 重新连接次数 优先级大于 全局设置，不影响其他请求设置
request.timeoutInterval = 120;//默认30 //优先级 高于 公共配置,不影响其他请求设置
request.requestSerializer = ZBHTTPRequestSerializer;
request.uploadDatas = uploadDatas;
if (![NSString isNullString:[DataManager sharedInstance].tag]) {
request.userInfo = @{@"info":[DataManager sharedInstance].tag};//与公共配置 UserInfo 不兼容 优先级大于 公共配置
};//与公共配置 UserInfo 不兼容 优先级大于 公共配置
} progress:^(NSProgress * _Nullable progress) {
NSLog(@"onProgress: %.2f", 100.f * progress.completedUnitCount/progress.totalUnitCount);
} success:^(id responseObject,ZBURLRequest * request) {
NSLog(@"responseObject: %@", responseObject);
if (successBlock) {
successBlock(responseObject);
}
} failure:^(NSError * _Nullable error) {
NSLog(@"error: %@", error);
if (failureBlock) {
failureBlock(error);
}
}];
}